Compressed air tools are
powerful and versatile and can have several advantages in several constructing
applications. You can use compressed air tools in several conditions, such as
if there is water on the ground or you are dealing with some inflammable kinds
of stuff without the chances of fire or explosions. Compressed air tools can be
costly, but you can always rent them at air compressor rental stores.
But before renting and compressed air tool, you need to have some information
about it.
Rotary screw
Most of the compressed
air tools use the rotary screw design, especially when they are working for
construction applications. In this design, two screws are interlocked side by
side; narrowing the space for the air chamber to pressurize the air. Even if
you are working with multiple tools, these tools can provide the best capacity.
The power of the rotary screw compressors is too high that they don’t even have
to use the storage tanks. Compressed air tools are designed for undisputed work
and the airflow can alter the speed according to the need.
Piston
If your work requires
less air than instead of a rotary screw air compressor, you can go for a piston
air compressor. While some of them can be powered with diesel and gasoline,
some can be run through electricity. In the piston air compressor, piston is
used to pressurize the air and keep it stored into large air tanks. Piston air
compressor is used to supply air pressure to nail guns, spray paints and even
to the much smaller sized wrenches.
The only difference
between rotary screw air compressor and piston air compressor is that the
piston air compressor may not provide you the best service if it’s running low and
will take some time to get recharged.
The right size
When you are renting or
buying compressed air tools, you should be aware of the size, which can be
measured either by cubic feet per minute or pounds per square inch. Talk to the
dealer about your requirement and get the perfect air compressor tools as if
you get the smaller number, you might not get the job done and if you buy a
much higher number, you are just wasting money.
Hoses
When you are renting a
compressed air tool, make sure the hoses are in perfect condition and can
withstand the pressure or temperature you need. Also, make sure that the length
and the diameter of the hose is compatible with your needs, otherwise, you will
lose air pressure. As the hoses are laid on the ground, stepped on and run over
by heavy trucks, you need to the condition daily to avoid any accidents at work
site.
Safety
Mostly all the accidents
happen due to the loose connectivity or leakage on the connection between the
hose and the compressor. If there is any loose end, it can end up very badly,
causing harm to you and your workers.
Filters
It’s mandatory that the
air compressor tools are free of any water, so you must check the air filter
and the water separator precisely before buying. Air will contain dust, dirt
particles, oil and water and these are enough to damage the entire system, so
check them very carefully before renting or buying.
Different types of compressed air dryers
Typically the air dryers
can be parted into three types,
- Refrigerated compressed air dryer, which can actively
remove the condensation
- Desiccant air dryer, which absorb
water vapor from the air
- Membrane air dryer, which part
water from the concept of migration
No comments:
Post a Comment